Results 1 to 4 of 4

Thread: Thread Sealant on Oil Hoses

  1. #1

    Join Date
    Aug 2015
    Posts
    53

    Thread Sealant on Oil Hoses

    While we all know that Teflon tape can get into the engine and block oil passages, I have been told that Teflon paste is not a problem. Can anyone confirm that this stuff:

    Name:  80633.jpg
Views: 243
Size:  17.9 KB

    is acceptable for use on an oil pressure fitting going into the accessory case?

  2. #2
    cub builder's Avatar
    Join Date
    Nov 2011
    Location
    North Central AR
    Posts
    443
    It looks like a pretty standard pipe thread dope, so should be acceptable on pipe threads.

  3. #3

    Join Date
    Apr 2016
    Posts
    7
    Are you asking about thread sealant on the tapered pipe fittings or the flared nuts on the oil hoses? The flared nuts that are at the end of the oil hoses themselves should not get any sealant of any kind. Your subject line is not clear.

  4. #4

    Join Date
    Aug 2015
    Posts
    53
    The pipe fitting inserted into the engine oil pressure port. 43.13 says no tape on those types of fitting and I've heard of failures cause by sealant ending up in the oil and blocking an oil gallery. I have been told that if a bit of the above type of thread sealant makes it into the oil it breaks down and cannot block any orifices. I'm trying to confirm that this is true.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •