Results 1 to 8 of 8

Thread: Smallest tractor taildragger autogyro

  1. #1

    Join Date
    Oct 2011
    Location
    Romont Switzerland
    Posts
    15

    Smallest tractor taildragger autogyro

    Good day

    how could an tractor taildragger autogyro look a like, a single seater that fits a 20’ freight container?

    rgds Erkki

  2. #2

    Join Date
    Jul 2011
    Location
    NW FL
    Posts
    405
    Quote Originally Posted by erkki67 View Post
    Good day

    how could an tractor taildragger autogyro look a like, a single seater that fits a 20’ freight container?

    rgds Erkki
    Here is one that comes close. www.littlewingsautogyro.com . It would fit a 20 foot container if you: (A) removed the rotor. or: (B) left the doors open at one end and built a roof and another door (to make the container four feet longer) Also, this aircraft is 8.5 feet tall, requiring one to remove the wheels and devise a cart or trolley to move it in and out. Alternate method: find a way to lean the rotor mast to the rear so it would fit.

    Good luck. Bob

  3. #3

    Join Date
    Jul 2011
    Location
    NW FL
    Posts
    405
    I just looked at the web site again. On the menu listing Builders photos, look at Toru Ito's aircraft. VW engine. He built an enclosed trailer that fits the aircraft with only one rotor blade removed.
    Bob

  4. #4

    Join Date
    Jan 2013
    Location
    Hills District, Sydney, Australia
    Posts
    3
    Quote Originally Posted by Bob Dingley View Post
    this aircraft is 8.5 feet tall
    Hi Erkki,

    There are also overheight containers, most common when I was at sea was 9'6" high external, don't know what that translates to internally. I do remember some taller ones but I didn't come across them too often.

    Mark

  5. #5

    Join Date
    Oct 2011
    Location
    Romont Switzerland
    Posts
    15
    Name:  D3AEE4C2-B5CB-4E64-A215-7ABC77B4686F.jpg
Views: 1540
Size:  15.9 KB

    Name:  904CA525-D4F1-43E0-9173-B2F74E68EA25.jpg
Views: 1482
Size:  21.6 KB

    Actually I had a design in my mind that comes close to one of those two gyros flown 60 years ago.

  6. #6

    Join Date
    Oct 2011
    Location
    Romont Switzerland
    Posts
    15
    A bent Monotube design with an engine up in front, a similar weightshift control a fix horizontal stab with two fins and rudder.

  7. #7
    I’m planning a tractor gyro using an Affordaplane airframe. I have a Brock KB2 and I’ll incorporate the Brock frame and mast into the A-plane frame so the mast takes the place of the “front windshield” of the A-plane frame. I’ll triangulate/ brace the mast off the crossmember for the landing gear for the Brock frame. I have a Rotax 582 to power it. It will likely have foot pegs outside the cockpit similar to an AirBike and it will have no fabric cover like the ultralight Little Wing Autogyro.

    Name:  IMG_2082.jpg
Views: 124
Size:  14.6 KBName:  IMG_1978.jpg
Views: 119
Size:  26.5 KBName:  IMG_2007.jpg
Views: 123
Size:  13.7 KBName:  IMG_2083.jpg
Views: 123
Size:  21.7 KB

  8. #8
    rwanttaja's Avatar
    Join Date
    Jul 2011
    Location
    Seattle
    Posts
    2,962
    John Van Voorhee's "Pit Bull" sounds like a pretty good match.
    Name:  pitbull.jpg
Views: 124
Size:  64.1 KB

    Too bad it's been off the market for 25 or so years.....

    Ron Wanttaja

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •