Page 2 of 2 FirstFirst 12
Results 11 to 14 of 14

Thread: First flight- Breezy N1879B

  1. #11
    Scooper's Avatar
    Join Date
    Jul 2016
    Location
    Santa Rosa, CA
    Posts
    65
    Fantastic job, Jeff. Watching the YouTube video makes me want to build one.
    - Stan Cooper (K4DRD), Private Pilot ASEL, LSR-I, EAA 115792 Lifetime Member, EAA Chapter 124
    Experimental AMD CH601XLi-B, N601KE, KSTS



  2. #12

    Join Date
    Aug 2016
    Location
    Chicago
    Posts
    939
    Thanks a million Jeff - makes perfect sense.

  3. #13
    "For a first flight- the CG is placed smack in the middle of the envelope." I am helping a friend who purchased a BREEZY and has made an engine/prop modification. We have weighed the plane and I made a spreadsheet to calculate the CG, but I can find no information on what the Forward and Aft limits should be, so I don't know what the envelope is. Are the limits in the plans information? The new owner might have that.
    Thanks.

    Bert Shivers
    Former Tandem Airbike owner
    ASMEL, CFII, A&P

  4. #14
    Jeff Point's Avatar
    Join Date
    Jul 2011
    Location
    Milwaukee
    Posts
    310
    Bert,

    What you really need is the CG range of the wing that your Breezy uses. There have been a variety of wings used over the years so if you could find that out it would be a good start. Mine uses a Cub wing (from Wag Aero plans) and I used the CG range from those plans. Start in the middle of the range and work your way out. I ultimately did the entire test sequence from the EAA manual at both the fore and aft limits. I could have pushed it even farther but there was no need.
    Jeff Point
    RV-6 and RLU-1 built & flying
    Tech Counselor, Flight Advisor & President, EAA Chapter 18
    Milwaukee, WI
    "It All Started Here!"

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •