Jim Hann
EAA 276294 Lifetime
Vintage 722607
1957 Piper PA-22/20 "Super Pacer"
Chapter 32 member www.eaa32.org
www.mykitlog.com/LinerDrivr
Fly Baby/Hevle Classic Tandem
Mike in Fayetteville ncharleykitplane.comI am building 1seat pusher, Harley powered with B model Harley engine .After I taxi it, I hope to have a scaled down synergy wing on it..,Google; synergy wing and look at my web page typed above.910-257-7322
Beeeuuutiful, love the workmanship. I saw one at the Bayport aerodrome in bayport long island. No one wanted to fly it I hope you are using an engine with a bit more horsepower then the original. Maybe some cheating little ailerons. I spoke with Roy Hall, who was on the wright brothers 100 year aniversary project kept telling the qroup that they needed more horsepower then the original they were building untill they through him off.
Joe
Proven powerplant for years, contact mag., issue #74... Also jack cox article, July 2002/page 56... Two current articles in Eaa experimenter magazine by Pat Panzera you can read in my web page under articles header..."harleykitplane.com"
Last edited by Mike; 01-28-2012 at 06:37 AM.
Shop at home garage,35 foot climate controlled! As you see can build many of these with glass/foam or carbon/foam.
Last edited by Mike; 01-28-2012 at 06:26 AM.
Takes 7 coats of wax on tooling molds before I can start layup for your new carbon pieces, then installed in factory jig in photo below to true cockpit.
Last edited by Mike; 01-28-2012 at 06:32 AM.
As you see, gyro flyers are interested in farings for open cockpit and full enclosed gyro cockpits. You see storage of all tooling molds above.
Last edited by Mike; 02-11-2012 at 12:56 PM.
Re: Acey Deucy Plans Source .... I've updated my original posting (page 6 in this thread). But, for convenience, here is the mailing address for Commander Powell's widow, who is now providing the plans:
Plans are available for $55 ($50 for plans, $5 for postage) . Send check made out to Peg C. Powell at 4 Donald Drive, Middletown, Rhode Island 02840