PDA

View Full Version : 2 cells with tube web internal shear resisting pattern


JLS
03-07-2019, 08:51 AM
Hi,



I didn't know if it was a 3 cells web, you have to make the spar junction with the upper and
bottom wing surface (or leading edge). What is your opinion about it ?
I put the .png on homebuiltaircraft and I open a thread on it on the EAA homebuilder corner.

Figures (formulas) are from Bruhn chapter on torsion.

Link https://drive.google.com/file/d/1NJW...ew?usp=sharing (https://drive.google.com/file/d/1NJWixLIgu76kng7vcG0JkTbbpmbm1EUF/view?usp=sharing)
JLS
05-15-2019, 01:55 AM
Use of the monospar wing, with thin walled closed (birch ) section
JLS
05-19-2019, 05:59 AM
Angle of incidence with help from Snorri Gudmundsson book
https://drive.google.com/file/d/10KDf9gfoeZ5iebuO63H_lccV5H3A8-2j/view?usp=sharing

Wing 6G neutral flaps CG 15% Chord
https://drive.google.com/open?id=1xu9sCpN6URY1-rZrb3cFufTEhRN2Zv18l7hkY4TvltM

Use of virtual work method(dummy loading) for landing gear deflection
https://drive.google.com/file/d/1eSCaqRgwH1YUBFtIGroBx6ZpKlBwwLP6/view?usp=sharin