PDA

View Full Version : Thatcher CX4 Parts $3995



N404CX
03-19-2016, 07:31 AM
SOLD SOLD SOLD

(CX4 kit of parts from Brian Riffel, #454, in Fresno, CA)

- Plans and Manual
- Notebook of articles on the CX4, including how-to’s
- Sheet, angle, tubing, rod, etc. this includes all the unused material (drops) in all thicknesses
- Wicks kit for the CX4, without rivets; you get to choose your rivet scheme
- All of the forming blocks

-Formed parts: firewall, bulkheads, vertical stabilizer, wing ribs
-Both spars and center section – main bolt holes are drilled in ¼” only
-All the remaining sheet stock parts have been cut out by machine, but not formed.
Here are some recent, close up photos. (https://goo.gl/photos/Ge6puwUQUWnJTdqV8)
You can see Brian's photos here (https://groups.yahoo.com/neo/groups/CX4/photos/albums/1461793181) (The wooden stand in not included, nor is the light).
The price is $3995.00 plus shipping plus materials for shipping.
I think the long tube containers can be limited to eight feet or less.


818 991-6259

glenwilcox59@gmail.com

N404CX
05-08-2016, 07:13 PM
Lots of closeup photos here (http://tinyurl.com/brian454)

Price reduced to $3,495.00