PDA

View Full Version : Pterodactyl Ascender - Dimension Needed Please!



Earth Magnet
10-01-2015, 02:39 PM
I'm restoring a wrecked Pterodactyl Ascender which had the hang tubes broken off at the junction with the front cross-through, but I forgot to take an important measurement before cutting off the damaged tubing...

Can anyone with a Pterodactyl give me an accurate measurement of the center-to-center distance between the rear cross-through and the front cross-through of the hang cage please? It doesn't seem to be in the manual anywhere.

Thanks a lot!

vondeliusc
10-08-2015, 07:00 PM
I have been given a R277 Pfledge unit I will be picking up this weekend.
It may have the correct dims.
Contact me at alpineglobalprivate@gmail daught com
-Christian


I'm restoring a wrecked Pterodactyl Ascender which had the hang tubes broken off at the junction with the front cross-through, but I forgot to take an important measurement before cutting off the damaged tubing...

Can anyone with a Pterodactyl give me an accurate measurement of the center-to-center distance between the rear cross-through and the front cross-through of the hang cage please? It doesn't seem to be in the manual anywhere.

Thanks a lot!

crusty old aviator
11-19-2015, 11:29 AM
Have you contacted DFE? They handle the Ascender design now. You can find them through a Google search.