View Full Version : make your parking boards
Kevin O'Halloran
07-01-2012, 01:42 PM
its very dry at Oshkosh now--but if it rains--can be hell getting your bird out of its parking spot if the tires sink into the ground--picture below is a parking board that a homebuilder can easily make--3/4 inch plywood 10x18 with a bevel on one end.
Kevin
2125
Kyle Boatright
07-01-2012, 01:45 PM
I think mine are 1/2" or 3/8" - no bevel. They end up slightly banana shaped at the end of the week, but they do make the airplane easy to move.
This could be a good project for the composite guys - design and build a really light, neato set of parking boards...
Kevin O'Halloran
07-01-2012, 01:50 PM
below is a parking board that is good for all you spam can drivers
1/8 inch diamond plate 10 x 18--note that the wheel block has holes in it so you can hold it down with tent stakes
Kevin
2126
Kevin O'Halloran
07-01-2012, 01:53 PM
AND for all the flying clorox bottle pilots (cirrus and plastic kit planes)
can be bought at Home depot and Lowes
plastic down spout splash guard--runs around $7.00 each
Kevin
http://csobeech.com/images/parking-ramp.bmp
Kyle Boatright
07-01-2012, 02:14 PM
Those are pretty spiffy!
Eric Page
07-01-2012, 10:17 PM
...plastic down spout splash guard
Now THAT'S ingenious!
hkyplr18
07-17-2012, 01:03 PM
Kevin,
Here did you find that 10x18 diamond plate? Everywhere I call will only sell it in 4'x8' sheets ( for $180.00) and they won't cut them....
Jordan
AeroPilot
07-17-2012, 01:53 PM
I know you can get some smaller pieces of diamond plating at Lowes and Home Depot.
Kevin O'Halloran
07-18-2012, 08:33 AM
Kevin,
Here did you find that 10x18 diamond plate? Everywhere I call will only sell it in 4'x8' sheets ( for $180.00) and they won't cut them....
Jordan
A local firm that makes trailers has it--its scrap--he cuts it to size for me and only charges $25.00 for 3 plates
I've gotten several sets for the pilots in B2OSH ( Bonanzas)
where in Oklahoma do you live---leaving at noon for OSHKOSH !!!!!!:):)
Kevin
hkyplr18
07-18-2012, 09:31 AM
A local firm that makes trailers has it--its scrap--he cuts it to size for me and only charges $25.00 for 3 plates
I've gotten several sets for the pilots in B2OSH ( Bonanzas)
where in Oklahoma do you live---leaving at noon for OSHKOSH !!!!!!:):)
Kevin
Hey Kevin,
I am down in Ardmore. Leaving Friday at 5am !
Powered by vBulletin® Version 4.2.4 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.