baxterquadrants
04-12-2012, 11:18 AM
I was sent these two old quadrants with the request to add a third control arm if possible.
I added 2" in height to the throttle arm to fit the 3rd arm between the front arm and the throttle.
The front arm has a 1" O.D tube cut in half to off set the control arm to the cable connection arm.
I used 3/4" O.D tubing to fit between the 1" tubing and the throttle tubings 3/8".
New curved upper spacers to give some distance between all the arms
What do you think?
http://www.homebuiltairplanes.com/forums/images/smilies/smile%20happy.gif
Rock and Joan
Baxter Quadrants Inc.
624 S.W. Langston Rd.
Renton, WA. 98057
(206)-303-7020
baxterquadrants@qwest.net (http://us.mc1139.mail.yahoo.com/mc/compose?to=baxterquadrants@qwest.net)
http://baxterquadrants.com (http://baxterquadrants.com/)
181418151816
I added 2" in height to the throttle arm to fit the 3rd arm between the front arm and the throttle.
The front arm has a 1" O.D tube cut in half to off set the control arm to the cable connection arm.
I used 3/4" O.D tubing to fit between the 1" tubing and the throttle tubings 3/8".
New curved upper spacers to give some distance between all the arms
What do you think?
http://www.homebuiltairplanes.com/forums/images/smilies/smile%20happy.gif
Rock and Joan
Baxter Quadrants Inc.
624 S.W. Langston Rd.
Renton, WA. 98057
(206)-303-7020
baxterquadrants@qwest.net (http://us.mc1139.mail.yahoo.com/mc/compose?to=baxterquadrants@qwest.net)
http://baxterquadrants.com (http://baxterquadrants.com/)
181418151816