Results 1 to 6 of 6

Thread: Source for .875 x .875 x .125 U 6061-T6

  1. #1
    Eric Witherspoon's Avatar
    Join Date
    Jul 2011
    Location
    Tucson, AZ
    Posts
    200

    Source for .875 x .875 x .125 U 6061-T6

    Anyone have a U.S. source for this U channel stock? Closest I have found so far is .875 x .875 bar, then turning 61% of it into chips. Even .875 x .875 x .125 wall square tube would be great - I can easily cut one side out to yield U channel.

    I have bought most of my tube from Tube Service in Phoenix, AZ, and some other "odd" sizes (where I didn't need 12-foot lengths) from onlinemetals.com. So I've been sourcing metal for a while - rather than just pointing me to a bunch of places to check - a pointer to someplace that definitely has either the U channel or the square tube would help a lot. Need 6061-T6, not the 6063 architectural stuff.
    Murphy's 13th: Every solution breeds new problems...

    http://www.spoonworld.com

  2. #2
    Eric Witherspoon's Avatar
    Join Date
    Jul 2011
    Location
    Tucson, AZ
    Posts
    200
    Thanks everyone for looking. I'm guessing by the quantity of views now with no leads that this size just isn't done. No big deal. Can get .875 x .875 square bar pretty cheap & make lots of chips... The design only calls for about 65 inches of this shape...
    Murphy's 13th: Every solution breeds new problems...

    http://www.spoonworld.com

  3. #3
    KDoersom's Avatar
    Join Date
    Jul 2011
    Location
    Central PA
    Posts
    55
    Have you tried Dillsburg Airplane Works

  4. #4

    Join Date
    Jul 2011
    Location
    Ft Lost in the Woods MO
    Posts
    57
    I had heard that Dillsburg closed last year. Any truth to that?

  5. #5
    KDoersom's Avatar
    Join Date
    Jul 2011
    Location
    Central PA
    Posts
    55
    As far as I know they ate still open. Live about 20 min from them.

  6. #6

    TW Metals

    Try TW Metals. They have almost everything.

    Quote Originally Posted by Eric Witherspoon View Post
    Thanks everyone for looking. I'm guessing by the quantity of views now with no leads that this size just isn't done. No big deal. Can get .875 x .875 square bar pretty cheap & make lots of chips... The design only calls for about 65 inches of this shape...

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •