Results 1 to 9 of 9

Thread: Moving wood and fabric plane across country

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1

    Moving wood and fabric plane across country

    Looking for any tips and advice on shipping wings and fuse a few 1000 miles. 28 foot once piece wing plus fuse. Im thinking a uhaul and lots of foam rubber padding and easy driving. Any tips would be appreciated. Lw

  2. #2
    Dana's Avatar
    Join Date
    Jul 2011
    Posts
    933
    28' wing, do U-Hauls even come that big?

  3. #3

    Join Date
    Aug 2016
    Location
    Chicago
    Posts
    919
    No, 26' is the max length at Ryder, Penske or U-Haul. Flat bed semi trailer? Would need a STOUT crate for each item I'm thinking?
    "Don't believe everything you see or read on the internet" - Abraham Lincoln

  4. #4

    Join Date
    Jul 2012
    Posts
    61
    Fly it home on a Pietenpol

  5. #5

    Join Date
    Jul 2011
    Location
    Justin, Texas
    Posts
    219
    Load the fuselage tail first on a trailer and then a rack to hold the wing flat overhead. Set the rack to have the trailing end tip flush at the trailer tail. Don't wrap or tarp the wing. I did this with an Aero Commander 680 wing, but had the forward almost at the front bumper of the truck. Mad for an interesting trip with all the gawkers.

  6. #6
    steve's Avatar
    Join Date
    Jul 2011
    Location
    Utah
    Posts
    200
    Build a wood frame around the well supported/cradled fuse and wing. Then call Old Dominion to discuss LTL shipping rates. Then again, call OD first.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •