Results 1 to 3 of 3

Thread: Initial Setup Settings/Libraries specific for Aircraft Design

  1. #1

    Initial Setup Settings/Libraries specific for Aircraft Design

    Hi, When I was deciding to install SolidWorks via EAA I saw an EAA webpage that gave directions for recommended settings/Libraries etc. useful for airplane design. I have not been able to find that page again. I cannot remember if it was on the main site or in the forums..

    Can anyone direct me to that location again?

    Are there any other recommendations for setup/addons/libraries etc. for aircraft design?

    I am specifically interested in carbon fiber composite/glider style design capabilities.

    Thanks in advance.
    Last edited by patrickrio; 06-09-2021 at 06:21 AM.

  2. #2
    SOLIDWORKS Support Volunteer Jeffrey Meyer's Avatar
    Join Date
    Nov 2011
    Location
    Israel
    Posts
    201
    Hi Patrick,

    I'm guessing you're looking for libraries of non-isotropic materials?
    I'll be happy if I'm wrong but I suspect you'll have difficulty finding such a "library", because non-isotropic materials are by definition very application specific - you (the user) need to define a myriad of parameters - layer thickness, layer material/properties, fiber direction, number of layers, fiber/matrix ratio, etc.
    Also, such composites are not specific to aircraft design. I don't remember seeing such a library in SW.
    So, sorry to be the party pooper - If you do succeed in finding such a library, please post a link so we can all join in the fun.

    Jeffrey

  3. #3
    There was a webpage with initial setup reccomendations for general aircraft somewhere though. I think it had airfoils and some other downloadable parts and examples on the list. I just can't find it anymore.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •