-
looking for 6061T6 2"-1/2 OD 0.083" wall tube
I'm looking for 6061T6 2"-1/2 OD 0.083" wall tube and can't find it. (0.065" or 0.125" wall
only). I looked at aircraftspruce, wicks and onlinemetals. Have you some addresses ?
Thanks in advance for help.
-
I don't know. But might try looking for aluminum pipe instead of tube.
Usually two thickness. Schedule 20 or 40 (or 80?)
Pipe is sold by inner diameter, more or less...
So 2" is 2.38" outside. https://www.onlinemetals.com/en/buy/aluminum-pipe
Last edited by Bill Berson; 03-23-2021 at 08:44 PM.
-
-
I found https://www.tubeservice.com/ (from a thread on homebuiltairplanes.com)
This reference is on their catalog.
If you have another one, I appreciate your sharing it if you want.
Thanks for your answers.
Last edited by JLS; 03-30-2021 at 09:44 AM.
-
-
Thanks for sharing but this tube is for wing spars, 0.083" wall is for strength, (0.035" and 0.065" wall is too thin, 0.125" is
too heavy).2"-1/2 OD is for leading edge radius.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules