I'm quite a beginner in 4130 fuselage truss conception and I'd like
to have your opinion about an example.
Is longeron continuity at the tail cone mandatory ?
Is it possible that a cabane be welded to the fuselage tailcone and
not having longeron continuity at all but weldments (as shown in
the drawing below at B and C) ?
Another question is the weldment of longeron with a different
6°angle tube (at A) and I'm asking myself if is it possible or not
(from a strenght point of view).
Last question. Have you a book proposal about 4130 fuselage truss
conception and welding ?
JLS, it can be done (breaks in the longerons) but it's not optimum. You will have to analyze each element (like you would for any truss anyway), and you'll probably need doublers or finger plates at those joints. At point C, you'll definitely need the green member, or some other substantial reinforcement.