Results 1 to 4 of 4

Thread: EAA Young Eagles Printer Program Horizontal & Vertical Offset Numbers Needed the

  1. #1
    FlyinAdamBadger's Avatar
    Join Date
    Jun 2018
    Location
    Davenport, Iowa
    Posts
    59

    EAA Young Eagles Printer Program Horizontal & Vertical Offset Numbers Needed the

    Delete
    Last edited by FlyinAdamBadger; 06-19-2019 at 10:14 AM.

  2. #2
    PaulDow's Avatar
    Join Date
    Jul 2011
    Location
    Connecticut
    Posts
    351
    I think you'll find that there are small variations between printer models, so there are no settings that will work for everyone. That's why the settings are provided instead of it being hard coded.
    I would print a sample on blank paper, and hold it up to light with the provided form. Then make adjustments until you get it to look right.

  3. #3
    FlyinAdamBadger's Avatar
    Join Date
    Jun 2018
    Location
    Davenport, Iowa
    Posts
    59
    I use a HP Inkjet 110, a very basic printer. Hope someone may be able to help.

  4. #4
    CharlieN's Avatar
    Join Date
    Sep 2017
    Location
    Vermont, USA
    Posts
    26
    It is not the printer, it is the software. You need to go into the program setup and adjust the offsets for your system, we all have had to do it. Paul described his method that worked.
    I used the original document and sent it through after each setting change. Took a number of tries.
    Regards,
    CharlieN
    President Chapter 968
    Greenmountainflyers.com
    Scratchbuilding a Piper J4 lookalike.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •