Results 1 to 3 of 3

Thread: 2 cells with tube web internal shear resisting pattern

  1. #1

    Join Date
    Nov 2017
    Posts
    45

    2 cells with tube web internal shear resisting pattern

    Hi,



    I didn't know if it was a 3 cells web, you have to make the spar junction with the upper and
    bottom wing surface (or leading edge). What is your opinion about it ?
    I put the .png on homebuiltaircraft and I open a thread on it on the EAA homebuilder corner.

    Figures (formulas) are from Bruhn chapter on torsion.

    Link https://drive.google.com/file/d/1NJW...ew?usp=sharing

  2. #2

    Join Date
    Nov 2017
    Posts
    45
    Use of the monospar wing, with thin walled closed (birch ) section
    Attached Images Attached Images  
    Last edited by JLS; 11-11-2020 at 06:01 AM.

  3. #3

    Join Date
    Nov 2017
    Posts
    45
    Angle of incidence with help from Snorri Gudmundsson book
    https://drive.google.com/file/d/10KD...ew?usp=sharing

    Wing 6G neutral flaps CG 15% Chord
    https://drive.google.com/open?id=1xu...v18l7hkY4TvltM

    Use of virtual work method(dummy loading) for landing gear deflection
    https://drive.google.com/file/d/1eSC...iew?usp=sharin
    Last edited by JLS; 07-24-2019 at 07:08 AM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •