Page 1 of 2 12 LastLast
Results 1 to 10 of 40

Thread: Paint for fabric covered aircraft

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1

    Paint for fabric covered aircraft

    Hi,
    My first post I think. I am in the process of building my 4th experimental aircraft and I am having a problem choosing a GOOD paint. The airplane is an older kit called a Seastar. I think there is more than one Seastar. This one is the same as the Paturi or the Petrel which is manufactured in Brazil. It is a bi-wing amphibian. The wings are fabric covered and the fuselage is fiberglass/Kevlar/carbon fiber. Other airplanes I have built I used Polyfiber or Superflight products usually. One was painted with the 2 part polyurethane polyfiber. Great finish but tons of work and all minor imperfections stand out. And one I painted with regular polyfiber and the yellow I was sold, FADED very badly after only 3 months. Really looked awful. I would rather not use a 2 part on this plane but I need something durable. I have a lot invested in this in both time and money. Time? Years actually. My problem is I want to paint it in a nice pattern using a lime green like "Go Daddy" green and yellow like DHL yellow. And white and some black. Polyfiber said they wanted about $500.00 a qt to mix the paint as I recall. Not today I think!!. So does anyone have any ideas what I can use, or maybe mix my own using polyfiber or what? I have seen some nice airplanes out there using lime green. It has to be pigment based I understand so it won't fade. I won't use latex of any type of vinyl or water based. If anyone has any ideas, i would appreciate it. This is my last build and it has to be my best, I hope. I will probably need to sell it when it's done. Thanks everyone

  2. #2
    Sam Buchanan's Avatar
    Join Date
    Nov 2011
    Location
    KDCU
    Posts
    567
    Even though PolyFiber doesn't recommend it, many fabric aircraft have been painted with automotive polyurethane paint. The modern polys are quite flexible and the ones I've seen seem to be holding up very nicely. This will yield a high gloss finish that will hold its gloss with no upkeep other than the semi-annual wash job. Kawasaki Green should be very close to what you are looking for or one of the lime green tints from 70-ish Mopar muscle cars. Hyunda has a stunning yellow on their new Veloster cars.
    Last edited by Sam Buchanan; 05-28-2018 at 12:08 PM.
    Sam Buchanan
    The RV Journal RV-6 build log
    Fokker D.VII semi-replica build log

  3. #3

    Join Date
    Oct 2011
    Location
    WA
    Posts
    1,205
    Automotive polyurethane (DuPont Imron) will last about 5-10 years outside and then get brittle and crack. Also cracks in cold weather. The old dope can last 20 years.

  4. #4
    Sam Buchanan's Avatar
    Join Date
    Nov 2011
    Location
    KDCU
    Posts
    567
    Imron is not one of the modern automotive finishes.

    How many of our custom-built planes spend their life tied down on a ramp?
    Last edited by Sam Buchanan; 05-28-2018 at 08:17 PM.
    Sam Buchanan
    The RV Journal RV-6 build log
    Fokker D.VII semi-replica build log

  5. #5

    Join Date
    Oct 2011
    Location
    WA
    Posts
    1,205
    In Alaska, 95% are tied outside for life.

  6. #6
    Sam Buchanan's Avatar
    Join Date
    Nov 2011
    Location
    KDCU
    Posts
    567
    I bet it is 100% in Siberia.....
    Sam Buchanan
    The RV Journal RV-6 build log
    Fokker D.VII semi-replica build log

  7. #7
    Quote Originally Posted by Sam Buchanan View Post
    Imron is not one of the modern automotive finishes.

    How many of our custom-built planes spend their life tied down on a ramp?
    Yeah, I think Imron has been around a while. I'm going to do some test samples. A lot of people have used it on fabric with great success. My airplane certainly wouldn't be out side a lot when not in use.

  8. #8
    Quote Originally Posted by Bill Berson View Post
    Automotive polyurethane (DuPont Imron) will last about 5-10 years outside and then get brittle and crack. Also cracks in cold weather. The old dope can last 20 years.
    Thanks but no on the dope. I have been doing research on Imron and most agree it will work. I still need to find out more though. I really don't want the wet glossy look and i think Imron comes also in a semi gloss.

  9. #9
    robert l's Avatar
    Join Date
    Mar 2017
    Location
    Heath Springs, S.C.
    Posts
    590
    Quote Originally Posted by chuckb01 View Post
    Thanks but no on the dope. I have been doing research on Imron and most agree it will work. I still need to find out more though. I really don't want the wet glossy look and i think Imron comes also in a semi gloss.
    You could always use latex house paint !

  10. #10
    Thanks very much for your reply. I have been doing some research on polyurethanes and have used them before on fiberglass sailboats and one seaplane hull. I did some more research on Imron and peoples opinion vary. Some say it will kill you. Some say you need a fresh air respirator. I used an organic respirator with no problem. And i don't paint outside because the smell of the stuff seems to attract the bugs. I may do a couple test samples of fabric i have put on test frames about a foot square. I think it will work on fabric from what I found out so far. thanks again

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •