-
Need help/advice about putting a wing cover on for a Pterodactyl Ascender
My friend and I are working on repairing an old Pterodactyl Ascender, and are trying to get a wing cover onto the frame. The cover is new... or at least it was once, about 15 years ago. It's never been installed, and we're having a devil of a time. The material seems in good shape, but it is un-yielding.
Try as we may, it appears to be just a bit too small.
So here are the questions...
- Are there any general tricks to the craft that we should know?
- Are there ways to soften the material, allowing it to perhaps stretch a bit more?
- If the above fail, where do we go to get a new sail cover? What vendors can we reach out to?
We believe the original vendor was something like "Great Lake Sails", but I can't seem to find them on the net. As I mention, this was quite a number of years ago, and we've lost the records.
Thanks to all.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules