Results 1 to 10 of 28

Thread: Homebuilt Powered Paraglider Quad

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1

    Homebuilt Powered Paraglider Quad

    Hi folks:

    New the forum and starting on a project to build my own powered paraglider quad similar to this:

    http://www.greeneagleppg.com/models/

    I like working in aluminum and using the joinery techniques of the Green Eagle and the Quicksilver ultralight. I've done some preliminary calculations using Daniel Raymer's excel spreadsheet from his simplified aircraft design book for both 36 and 42 square meter paragliders. Not quite sure what to use for a powerplant/prop combo yet.

    Anybody have experience/interest here?

    I've got a dual degree in math and computers, and I'm not afraid to use either one to help with the process. I've got a copy of Raymer's design concept book and the student aircraft design software too. I am not currently a pilot, and locating training will be an issue also. There is a Blackhawk dealer fairly close who trains quads/trikes, but they're fairly expensive if I have my own equipment. At this point, I've purchased some used equipment to to some preliminary testing which I will probably sell later since I'm pretty sure it's not quite up to the task but will help me learn about the engineering/build issues.

    Thanks, Michael

  2. #2

    Join Date
    Oct 2011
    Location
    WA
    Posts
    909
    Welcome to the forum.
    The link shows two similar models. Why is the first called a PPG and the second called a PPC?

  3. #3
    PPG is a Powered ParaGlider and PPC is a Powered ParaChute. They are different types of fabric wings and use different types of controls. The paragliders are cheaper, faster, and more maneuverable.

    I forgot to mention that I'm developing for FAR Part 103.

  4. #4

  5. #5
    Dana's Avatar
    Join Date
    Jul 2011
    Posts
    693
    The best place for ppg advice is the ppgbiglist yahoo group. There's also a ppghomebuilt yahoo group.

  6. #6

    Join Date
    Jul 2011
    Location
    Clarklake, MI
    Posts
    2,258
    I'm interested in following your progress so if you put up a webpage or Facebook group post a link.

    Particularly interested in the nuts and bolts part. I'm a hobby machinist A&P.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •