Page 1 of 2 12 LastLast
Results 1 to 10 of 14

Thread: First flight- Breezy N1879B

  1. #1
    Jeff Point's Avatar
    Join Date
    Jul 2011
    Location
    Milwaukee
    Posts
    309

    First flight- Breezy N1879B

    After nearly nine years, thousands of hours and more than a few cubic kilodollars, on Saturday Aug. 26 I took the Breezy up for the first flight. The airplane performed well with no major squawks save for a minor oil leak and some intercom adjustments.

    I built N1879B from the standard Breezy plans with only a couple small modifications including larger tail area and modifications to the front seat to accommodate my 6'3 frame. All work was done by me. Wings are Wag Aero Sportsman 2+2 wood rib/ spar. Covering and painting is Stewart Systems. Motor is an O-200 from a wrecked homebuilt, major overhauled by me with some performance mods (Lycon 9:1 pistons, C90 cam, electronic ignition.) Prop is by Ed Sterba. Empty weight is 801 lbs, not bad for a Breezy with starter, battery and alternator.

    Name:  IMG_0778 3.jpg
Views: 3500
Size:  89.7 KB

    I also put together a video that covers the building and first flight. Nine years condensed into 15 minutes. I hope you enjoy it.

    https://youtu.be/sa3mx3gzQGY
    Jeff Point
    RV-6 and RLU-1 built & flying
    Tech Counselor, Flight Advisor & President, EAA Chapter 18
    Milwaukee, WI
    "It All Started Here!"

  2. #2
    EAA Staff / Moderator
    Join Date
    Jun 2017
    Posts
    114
    Congrats, Jeff! That's a great accomplishment!

  3. #3
    gbrasch's Avatar
    Join Date
    Nov 2011
    Location
    Arizona
    Posts
    530
    Awesome Jeff!!!!! Congrats!!!!! Glenn
    Glenn Brasch
    KRYN Tucson, Arizona
    2013 RV-9A
    Medevac helicopter pilot (Ret)
    EAA member since 1980
    Owner, "Airport Courtesy Cars" website.
    www.airportcourtesycars.com
    Volunteer Mentor www.SoAZTeenAviation.org

  4. #4
    EAA Staff / Moderator Hal Bryan's Avatar
    Join Date
    Jul 2011
    Location
    Oshkosh, Wisconsin, United States
    Posts
    1,296
    Well done, Jeff! Congratulations!

    I spent the day with Rob Unger yesterday, looking at his Breezy and and then got to fly another one on the field. Great fun!

    Now hurry up and write me the story of the build for the "What Our Members are Building" section of the magazine!

    Hal Bryan
    EAA Lifetime 638979
    Vintage 714005 | Warbirds 553527
    Managing Editor
    EAA—The Spirit of Aviation

  5. #5
    Jeff Point's Avatar
    Join Date
    Jul 2011
    Location
    Milwaukee
    Posts
    309
    I'll work on that Hal. You just had a Breezy featured a few months ago- people will start thinking they are taking the RVs over if we have two in one year!
    Jeff Point
    RV-6 and RLU-1 built & flying
    Tech Counselor, Flight Advisor & President, EAA Chapter 18
    Milwaukee, WI
    "It All Started Here!"

  6. #6

    Join Date
    Aug 2011
    Location
    Alabama
    Posts
    2,236
    Congrats!
    The opinions and statements of this poster are largely based on facts and portray a possible version of the actual events.

  7. #7
    Jim Rosenow's Avatar
    Join Date
    Jul 2011
    Location
    Smithville, OH
    Posts
    237
    Truly in the original spirit of EAA, Jeff! Well done on both the airplane and the video!

    Jim

  8. #8

    Join Date
    Aug 2016
    Location
    Chicago
    Posts
    918
    One quick 'uneducated' question (formerly known as a stupid one - lol) the purpose/use of ballast in the passenger seat?

  9. #9
    gbrasch's Avatar
    Join Date
    Nov 2011
    Location
    Arizona
    Posts
    530
    I missed the video the first time, really cool!
    Glenn Brasch
    KRYN Tucson, Arizona
    2013 RV-9A
    Medevac helicopter pilot (Ret)
    EAA member since 1980
    Owner, "Airport Courtesy Cars" website.
    www.airportcourtesycars.com
    Volunteer Mentor www.SoAZTeenAviation.org

  10. #10
    Jeff Point's Avatar
    Join Date
    Jul 2011
    Location
    Milwaukee
    Posts
    309
    Quote Originally Posted by CHICAGORANDY View Post
    One quick 'uneducated' question (formerly known as a stupid one - lol) the purpose/use of ballast in the passenger seat?
    The ballast is used to place the CG in a specific location. During phase 1 flight testing there are all sorts of corners of the envelope to be explored and CG adjustment is part of that.

    For a first flight- the CG is placed smack in the middle of the envelope. It is then slowly expanded during testing by adding/ removing balast.
    Jeff Point
    RV-6 and RLU-1 built & flying
    Tech Counselor, Flight Advisor & President, EAA Chapter 18
    Milwaukee, WI
    "It All Started Here!"

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •