Page 2 of 4 FirstFirst 1234 LastLast
Results 11 to 20 of 34

Thread: Wooden propellers for any Engine

  1. #11
    meglin's Avatar
    Join Date
    Aug 2015
    Location
    Kharkov
    Posts
    112
    "At long last I have flown my new aeroplane with your prop. It was only the first flight yesterday and for just 30 mins. My first impression is that the prop is very good match for both the 0320 and my airframe. The climb rate was up to 1500ft/min and level cruise at 2200/2300 revs nearly 120 Kts after only a very rough short evaluation. I think the 75% cruise will be 130kts so the prop must be very near to the best compromise available.

    As you know many Vans 6 owners use the popular 0320 lycoming and the Vans is very similar in general configuration (but not construction) to my airframe so this spec prop should work well. As the Vans is very popular there should be a good market for your product"
    Best regards, Vladimir Meglinsky
    My site: http://propeller.mozello.com/

  2. #12
    meglin's Avatar
    Join Date
    Aug 2015
    Location
    Kharkov
    Posts
    112
    These propellers went to France. Designed for Limbaсh and for Jabiru.
    Attached Images Attached Images    
    Best regards, Vladimir Meglinsky
    My site: http://propeller.mozello.com/

  3. #13
    meglin's Avatar
    Join Date
    Aug 2015
    Location
    Kharkov
    Posts
    112
    Individual design and manufacture of wooden propellers.
    Best regards, Vladimir Meglinsky
    My site: http://propeller.mozello.com/

  4. #14
    meglin's Avatar
    Join Date
    Aug 2015
    Location
    Kharkov
    Posts
    112
    We continue to design and manufacture propellers for individual orders. Handmade.
    Best regards, Vladimir Meglinsky
    My site: http://propeller.mozello.com/

  5. #15
    meglin's Avatar
    Join Date
    Aug 2015
    Location
    Kharkov
    Posts
    112
    1/2 VW
    propeller just sent
    Attached Images Attached Images      
    Best regards, Vladimir Meglinsky
    My site: http://propeller.mozello.com/

  6. #16
    meglin's Avatar
    Join Date
    Aug 2015
    Location
    Kharkov
    Posts
    112
    This propeller is designed for Peugeot engine.
    Attached Images Attached Images   
    Best regards, Vladimir Meglinsky
    My site: http://propeller.mozello.com/

  7. #17
    meglin's Avatar
    Join Date
    Aug 2015
    Location
    Kharkov
    Posts
    112
    The queue of customers has decreased significantly - now we do faster, about 1 month.
    Best regards, Vladimir Meglinsky
    My site: http://propeller.mozello.com/

  8. #18
    meglin's Avatar
    Join Date
    Aug 2015
    Location
    Kharkov
    Posts
    112
    Dear colleagues! The number of orders for wooden propellers has increased dramatically. We don't have time. I must warn potential customers that the propeller will have to wait several months. We can't compromise the quality of the product.
    Best regards, Vladimir Meglinsky
    My site: http://propeller.mozello.com/

  9. #19
    meglin's Avatar
    Join Date
    Aug 2015
    Location
    Kharkov
    Posts
    112
    New propeller for Sauer engine
    Attached Images Attached Images  
    Best regards, Vladimir Meglinsky
    My site: http://propeller.mozello.com/

  10. #20
    meglin's Avatar
    Join Date
    Aug 2015
    Location
    Kharkov
    Posts
    112
    Some photos
    Attached Images Attached Images    
    Best regards, Vladimir Meglinsky
    My site: http://propeller.mozello.com/

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •