Results 1 to 2 of 2

Thread: WTB: Narco Nav12 Connector and Manual

  1. #1
    TedK's Avatar
    Join Date
    May 2013
    Location
    Pax River MD
    Posts
    365

    WTB: Narco Nav12 Connector and Manual

    Have Narco Nav12 combined VOR Receiver-Indicator. Need the Connector block that slides into back, and the Install Manual.


    This connector and manual from Nav11 may work too. If you have these ancient parts, much appreciated.


    Ted

  2. #2

    Join Date
    Apr 2012
    Location
    Satsuma, AL.
    Posts
    13
    The nav 11 plug would work and I may have one in my old avionics shop test cable box somewhere, but I seriously suggest that you don't waste your time and money on it. When they were new they wern't very good.
    The only difference in the anv 11 and 12 is the GS needle and flag and the channeling switch for the GS receiver (not included in the radio itself).
    Run Forrest Run!
    Even the later nav 110 or 112 are not much better and require expebsive boards to repair.
    Invest in something better. If your goal is to get a GS receiver to fly or train IFR then even more important.
    If you just need to fill an instrument hole and add weight I can send you a coverplate made of 1/2: steel.

    JDB

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •