-
Came upon this one today. I hate working fiber glass with masking tape and having to remove it or leave it behind. I do not know if this is a new discovery or just that I haven't come across this solution. This is a fiber glass over styrene, with epoxy. Just a new sponson float for my U/L. Since I had already completed the plane I had this product on hand. If one is a new builder most would not.Unless they had already built a plane and used the Stewart's system. Styrene will not except solvent based adhesives .The Stewart fabric adhesive seems to be an excellent alternative to masking tape. Use sparingly and cover patiently one can get a tight wrap over an object and even tack down with a hobby iron. After you are pleased with the package have at it with the epoxy resin. I was still using masking tape but If i do another I will not .
Last edited by Norman Langlois; 09-18-2011 at 06:40 PM.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules