Page 1 of 2 12 LastLast
Results 1 to 10 of 14

Thread: Help identify an old gauge?

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1

    Help identify an old gauge?

    Slightly off topic, but you are the guys to figure this out.. it came in a box of parts...

    Its a gauge, nickel plated, about 1 inch wide, has a handle-slides into something. No way to connect it to anything-inductive, or set by hand only??

    Reads E...F on a scale. Looks aircraft? Came in a cardboard tube thats well worn, might be a test gauge?

    Help!!






  2. #2
    MickYoumans's Avatar
    Join Date
    Nov 2011
    Location
    KBXG - Georgia
    Posts
    108
    Looks like a gas indicator to me. E = empty and F = full.

  3. #3
    cluttonfred's Avatar
    Join Date
    Oct 2011
    Location
    World traveler
    Posts
    457
    How about a shot of the bottom? Is there anywhere for a float or an actuating rod of some kind to attach?
    *******
    Matthew Long, Editor
    cluttonfred.info
    A site for builders, owners and fans of Eric Clutton's FRED
    and other safe, simple, affordable homebuilt aircraft

  4. #4

    Join Date
    Jul 2011
    Location
    NW FL
    Posts
    405
    Just a hunch with nothing to back it up, could be part of a test set to calibrate a fuel or oil tank.

  5. #5
    Here is a shot of the back. There is nothing to connect this to anything at all..


  6. #6
    Removing the two screws may tell the story. Or, take a small drill bit, insert in hole & gently push. Does the indicator needle move?

  7. #7
    No answer from the company at all..... I do not see any actual hole to place a needle? Stumped!

  8. #8
    Jim Hann's Avatar
    Join Date
    Aug 2011
    Location
    Ballwin, Missouri, United States
    Posts
    425
    I'd also guess a quantity gauge, could a float rod that rotates belong in that hole in the center?

    Google "us gauge co" without the quotes and click on images, some neat stuff!
    Jim Hann
    EAA 276294 Lifetime
    Vintage 722607
    1957 Piper PA-22/20 "Super Pacer"
    Chapter 32 member www.eaa32.org
    www.mykitlog.com/LinerDrivr
    Fly Baby/Hevle Classic Tandem


  9. #9
    Its not an actual hole... I can see no way to hook it up to anything... Just set it with the knob.. but, then whats the point? Ive been googling us gauge for days and other searches.. I cant find anything at all like it? Mystery.... for now

  10. #10

    Join Date
    Nov 2011
    Location
    Minnetonka MN
    Posts
    142
    Could it be pressure activated?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •