-
LED lights and Radio noise?
Rather than pay a couple of hundred bucks for TSO'd LED landing and taxi lights, I bought a couple budget PAR36 LEDs online. They seem to add a fair bit of noise to the radio. Anyone had a similar problem and found a solution?
ted
Last edited by TedK; 09-06-2016 at 04:34 PM.
-
Ted , I am guessing here a bit since I do not have specs of the specific "bulbs". All LED systems use some sort of a current controller and they vary from a resistor to switcher power supply. I am guessing you might have the latter. Since you unlikely have shielded cables to the lamps the switcher frequency (or a harmonic) is radiating either directly into the radio or via the power lines to the buss. A solution - and an easy one - is the use of ferrite beads. Here is a link http://www.mglavionics.co.za/efisacc2.html
There are direct sources for these beads as well. The clamp type beads although easy to install are not as effective as the closed.
Hope this helps
Jim
Last edited by Jim Heffelfinger; 09-06-2016 at 09:11 AM.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules