Page 1 of 2 12 LastLast
Results 1 to 10 of 23

Thread: Engineering "rules"

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Mike Switzer's Avatar
    Join Date
    Jul 2011
    Location
    Central Illinois
    Posts
    979

    Engineering "rules"

    I think there must be a list of engineering "rules" somewhere, one of which is something like "even a minor design change requires a minimum of 24 subsequent changes and a minimum of 8 hours of re-design"?


    GRRR

    All I wanted to do was increase the legroom / seating position to be at least as accommodating as my 944...


    Sorry, just had to vent.

  2. #2
    Mike Switzer's Avatar
    Join Date
    Jul 2011
    Location
    Central Illinois
    Posts
    979
    Oh, and if anyone can tell me why the size of the text & arrows on my leader lines isn't the same as it is on the other dimensions (ACAD 2004) I would appreciate it. I can't seem to find any way to change it other than scaling after I insert them.

  3. #3

    Join Date
    Feb 2012
    Posts
    3
    Quote Originally Posted by Mike Switzer View Post
    Oh, and if anyone can tell me why the size of the text & arrows on my leader lines isn't the same as it is on the other dimensions (ACAD 2004) I would appreciate it. I can't seem to find any way to change it other than scaling after I insert them.
    Go to Dimension - Style - Modify and you set the size of the text and arrows to whatever you like.

  4. #4
    Mike Switzer's Avatar
    Join Date
    Jul 2011
    Location
    Central Illinois
    Posts
    979
    Quote Originally Posted by cynamonb View Post
    Go to Dimension - Style - Modify and you set the size of the text and arrows to whatever you like.
    Thanks, But I already tried that, it changes it for all the regular dimensions, but not the leader lines or text. I screwed around with it for a couple hours the other day & couldn't find any way to do it, and yes, that is what would have done it in ACAD 2000, which was the last version I used a lot.

  5. #5
    Matt Gonitzke's Avatar
    Join Date
    Aug 2011
    Location
    Wichita, KS
    Posts
    332
    I hear ya...I'm going to have to enlarge the horizontal stabilizer on the scale warbird replica I'm designing...can't wait to see what sort of cascading effect that has...

  6. #6

    Join Date
    Feb 2012
    Posts
    7
    Does this count?

    What is the difference between mechanical engineers and civil engineers?

    Mechanical engineers build weapons and civil engineers build targets.

    Apologies in advance to any bridge-builders out there...

  7. #7
    bwilson4web's Avatar
    Join Date
    Oct 2011
    Location
    Huntsville, AL
    Posts
    120
    Quote Originally Posted by Mike Switzer View Post
    I think there must be a list of engineering "rules" somewhere, one of which is something like "even a minor design change requires a minimum of 24 subsequent changes and a minimum of 8 hours of re-design"?


    GRRR

    All I wanted to do was increase the legroom / seating position to be at least as accommodating as my 944...


    Sorry, just had to vent.
    We used to say, "There is never enough time to do the job right but always enough time to do it over."

    Bob Wilson

  8. #8

    Join Date
    Aug 2011
    Location
    Alabama
    Posts
    2,236
    The corrollary to that, Bob, is "If you wait until the last minute to do something it only takes a minute to get it done."
    The opinions and statements of this poster are largely based on facts and portray a possible version of the actual events.

  9. #9
    Mike Switzer's Avatar
    Join Date
    Jul 2011
    Location
    Central Illinois
    Posts
    979
    Well, I guess it will take as long as it takes, it is a whole lot easier (and cheaper) to move lines on a screen than to re weld something.

  10. #10
    Eric Witherspoon's Avatar
    Join Date
    Jul 2011
    Location
    Tucson, AZ
    Posts
    200
    See my signature line. My "bumper sticker" for building it the way the plans show...

    My other "bumper sticker of homebuilding", if I had one, is attributed to Bill Lear - "you don't have to fix what you leave out".

    More engineering-related -

    A "greybeard" once told me the design is done when the whole team is equally unhappy with it. If someone's happy, they're holding too much margin... You need to figure out what their margin _really_ is...
    Murphy's 13th: Every solution breeds new problems...

    http://www.spoonworld.com

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •