Results 1 to 3 of 3

Thread: Melted Boelube

  1. #1

    Join Date
    Nov 2014
    Location
    Richland, WA
    Posts
    1

    Melted Boelube

    The temps in my shop got so hot in the past few weeks that the Boelube blue paste I have melted clean through! It looked like it separated so I mixed it back up but it's still a liquid. Anyone else run into this before? Is it possible to get it to go back to a paste? Is it ruined? Thanks.
    Name:  IMG_5701.jpg
Views: 754
Size:  83.4 KB

  2. #2
    DaleB's Avatar
    Join Date
    Sep 2015
    Location
    KMLE
    Posts
    654
    Mine does that whenever the weather gets hot, which is to say all summer. It's still OK, its just now liquid, until it cools off. If you bring it into an air conditioned house it will re-solidify, and if you catch it as it cools down you can stir it back together -- though I typically don't bother. Personally, I was pretty disappointed with the low melting point of the Boelube "paste". Great if you're working in a climate controlled area, but for those of us working in garages and hangars it goes from rock hard in winter to liquid in summer.
    Measure twice, cut once...
    scratch head, shrug, shim to fit.

    Flying an RV-12. I am building a Fisher Celebrity, slowly.

  3. #3
    Matt Gonitzke's Avatar
    Join Date
    Aug 2011
    Location
    Wichita, KS
    Posts
    332
    Mine is liquid from roughly May to November...still works fine. I keep it in the garage beverage fridge unless I'm using it, and that helps a bit.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •