Printable View
Hi, All;
I've recently come into an iCom A200 comm unit and tray.
I need to re-wire it. The current terminals in the molex edge connector are crimp-type, p/n Molex 4366-GL. The usual sources, Mouser, Digikey, Allied, eBay, etc. all say these are NLA.
Does anyone have any suggestion as to where I might find some terminals, or, alternately, find a new 30-pin connector with solder lugs or some other viable solution?
Thanks for any input;
Carl: Take a look at this and see if it helps: https://www.molex.com/pdm_docs/sd/008030304_sd.pdf
If that fails and a call to Molex doesn't pan out, new trays are available here: https://www.ameradio.com/product/8087/description.html or here: https://www.theantennafarm.com/catal...a200-tray-2426
Thanks, Craig; good list of the different part numbers for same part except for plating, etc. Unfortunately, they're just about all still "obsolete" and not stocked by anyone. Trays look interesting, and, no, I haven't contacted either of the sellers, but I would ignorantly assume a new connector and terminal pins would be included. *sigh* The search continues...
Hi,
Try Ebay for Atari edge connectors 30 pin.
Interesting, Dave; thanks for the tip. Unfortunately, only ones on ebay right now are just the plastic shells, no pins. Will keep looking though....
this may be the wrong connector but......... i was looking up the rear connector for a"""" icom ac a210""""" , and "aircraft spruce"......came up with this #10-05914 , and the photo looked correct for the install i was looking at ............ ... .. .good luck, good day /rick
Thanks Rick; number of pins is correct but really need to see the other side. What kind of card edge connector do you have on the 210?
Attachment 7896Hi, are you sure this isn't your huckelberry? Card Edge Connector Row 30 Pin 3.96mm Pitch 805 Slot Solder PCB 2x15 Socket CP30
Y’know, Rick, I think that will work! I downloaded the 210 install guide, and the diagrams and illustrations look like an exact match except for the 210 not having a wire for panel light. For the price it’s a decen gamble.
Dave, that about looks like it. I’m away from the unit for a few days but will check that one as well as the one from spruce.Quote:
Originally Posted by davreich
I am in the same boat and the reply I got from ICOM tech support says you can use the A210 connector and Spruce has these at the time of this post.....
Here is a copy of ICOM reply.
Greetings charlie,
Thank you for contacting Icom America.
You can use P/N 6510030970 in lieu of the original P/N of 6510013850. You can order this part by contacting our Parts Dept at (800)346-0495 Mon-Fri 7am-4pm Pacific.
Click here for information regarding Warranty Registration, Service/Repair Authorization form, Knowledge Base & Technical Support: http://www.icomamerica.com/en/support/default.aspx
Note: Mention of third party products or services is provided for customer convenience and does not imply an endorsement or quality assurance by ICOM America.
Sincerely,
Greg Popovich / KF2M
Technical Support Representative
actually,
I see that this place still has the pins too.
https://www.mikesarcade.com/cgi-bin/...?sku=CECPIN010
Charlie
Yup. Found it and bought it 2 months ago!Quote:
Originally Posted by charosenz