PDA

View Full Version : EAA SOLIDWORKS University Tutorials



Cory Puuri
07-31-2018, 01:32 PM
EAA launched the EAA SOLIDWORKS University member benefit at EAA AirVenture Oshkosh 2018 and over 400 student sessions were logged! All of the tutorials have been uploaded to our site (http://eaa.org/swu). At next year's convention, we hope to offer integrated workshops, where members will be able to fabricate a range of aircraft parts. Time permitting, EAA will offer a webinar version of the Quick Start Tutorial and develop video tutorials that walk you through each of the tutorials in the EAA SWU. If you encounter any errors or typos, please post a note on this thread and one of our volunteers will help you.

blane.c
09-13-2018, 10:32 AM
EAA launched the EAA SOLIDWORKS University member benefit at EAA AirVenture Oshkosh 2018 and over 400 student sessions were logged! All of the tutorials have been uploaded to our site (http://eaa.org/swu). At next year's convention, we hope to offer integrated workshops, where members will be able to fabricate a range of aircraft parts. Time permitting, EAA will offer a webinar version of the Quick Start Tutorial and develop video tutorials that walk you through each of the tutorials in the EAA SWU. If you encounter any errors or typos, please post a note on this thread and one of our volunteers will help you.

Thank you for link

AMDguy
12-08-2018, 05:14 PM
This is a really cool resource to know about...

R_B
12-30-2019, 08:59 PM
EAA launched the EAA SOLIDWORKS University member benefit at EAA AirVenture Oshkosh 2018 and over 400 student sessions were logged! All of the tutorials have been uploaded to our site (http://eaa.org/swu). At next year's convention, we hope to offer integrated workshops, where members will be able to fabricate a range of aircraft parts. Time permitting, EAA will offer a webinar version of the Quick Start Tutorial and develop video tutorials that walk you through each of the tutorials in the EAA SWU. If you encounter any errors or typos, please post a note on this thread and one of our volunteers will help you.

I get "page not found".
Has the link expired, been replaced for 2019-2020, or am I doing something wrong ?

Kim
12-30-2019, 11:44 PM
Same here. Not found. I also went thru the EAA SW resource pages (kind of quickly), and could not find a good link.



I get "page not found".
Has the link expired, been replaced for 2019-2020, or am I doing something wrong ?

Cory Puuri
01-03-2020, 08:42 AM
Same here. Not found. I also went thru the EAA SW resource pages (kind of quickly), and could not find a good link.

Sorry, for the delay. We reorganized our benefits on the site and some of the links were broken. I fixed it.

Alan_VA
07-14-2020, 08:23 AM
Quick Start Tutorial question: Steps 23-25 of the tutorial aims to define the extruded back end of the throttle knob. I could not find the "Insert Sketch" command of step 23, but found an alternative method of getting to the option to select a circle. The problem was that the parameter values were greyed out, preventing me from defining the radius of the circle. Any suggestions?

kb1lqc
01-07-2021, 12:12 AM
Am I missing something or is the first EAA solidworks university PDF guide about designing a throttle lever missing all directions regarding the button, shaft, and stick?

https://www.eaa.org/~/media/e1117504abef4af89b99c1ec82a0a344.ashx